AcuRite 01096M Temperature & Humidity Station with 3 Indoor/Out of doors Sensors
$58.19
Worth: $58.19
(as of Nov 22, 2024 15:54:53 UTC – Particulars)
Keep knowledgeable concerning the environmental circumstances affecting the locations and stuff you care about. With an AcuRite indoor & out of doors multi-sensor station with 3 sensors, you possibly can precisely monitor temperature and humidity in 4 areas in and round your own home. Due to its extensive number of options and capabilities, you possibly can get pleasure from dependable, actionable Info empowering you to maintain your own home secure and in high situation. Merely pair the digital show with the three included wi-fi sensors. Every indoor temperature and humidity sensor has a built-in show, digital thermometer and hygrometer to measure indoor environmental circumstances with precision and accuracy. The out of doors temperature and humidity sensor is weather-resistant for year-round use. All environmental circumstances are conveniently proven on an easy-to-read display screen. Contains day by day excessive and low information for temperature and humidity. Alarms can simply be set as much as notify you if circumstances exceed your programmed ranges. Show powered by 3 AA alkaline batteries (not included). every indoor sensor powered by 2 AAA alkaline batteries (not included). out of doors sensor powered by 2 AA alkaline or lithium batteries (not included). It is greater than correct, it is AcuRite.
Screens environmental circumstances in 4 areas inside and Exterior your own home (3 wi-fi sensors, plus built-in sensors contained in the digital show)
Simple-to-read digital show reveals temperature and humidity information from all 4 areas at-a-glance
Multi-Room station offers humidity gauge, indoor/out of doors temperature, clock and date
Presents programmable alarms, alerting you to take motion if environmental circumstances exceed your most popular vary
Contains one (1) wi-fi, weather-resistant out of doors sensor and two (2) indoor temperature and humidity sensors
Clients say
Clients just like the performance and ease of setup of the climate station. They point out it really works properly, is intuitive, and straightforward to mount. Some respect the good appears to be like and readability. Nonetheless, some dislike the show high quality. Opinions are blended on temperature monitoring, accuracy, and worth for cash.
AI-generated from the textual content of buyer opinions
10 reviews for AcuRite 01096M Temperature & Humidity Station with 3 Indoor/Out of doors Sensors
Add a review
Related Products
$58.19
Danny –
Works as Advertised and Easy to Set Up
I was concerned about range – it is not a problem. I thought it might be a pain to set up – it was not. It just works great – put the batteries in the base unit and the sensors and it just came up. You do have to set the switch in each remote sensor – they are small and not easy to see. But that was the only glitch I found. Highly recommended!
L. Ross –
Good price, good equipment.
I purchased these multiple sensors to monitor the rooms in my home as we don’t have central heating/cooling. Rooms are heated by electric baseboard heaters, that are not on individual thermostats. Upon opening these sensors and getting them up and running, the main panel and the sensors all showed the same temperature and humidity within 10 minutes. After several weeks, I noticed that one sensor was showing the exact temp and humidity all the time, day or night, no variation at all. I removed the batteries to “reset” the sensor, and it began working properly again and has been normal for 6 days now. Earlier reviews indicated problems, but I’ve not seen any of them except for the one that got “stuck”, and as noted, it’s working fine now. I believe the sensors to be accurate, and I would recommend this system if you are looking for a good way to monitor your home.UPDATE AFTER 60 DAYS:So, overall these units are working exactly as they should. During the last 60 days, the earlier mentioned sensor continued to “get stuck” about once a week, so I exchanged it with another unit that was closer to the receiver. That completely solved the problem, all sensors are working properly and giving updated readouts in a reasonable time. On one occasion, the main receiver “got stuck” and needed to be reset as it wasn’t updating. That was about 40 days ago, and it’s still working fine. I continue to recommend this system to monitor temps in your home!!
Doug W –
Nice enough
Positives, you get to see up to 4 temperature readings from three other sensors.I took off a star for because you are not able to switch displays on the indoor units. The only unit you are able to see other temps is on the main unit. Being in a two story house, this is not what I wanted, I want to be able to see temps from outside and different levels of my house in multiple locations, this unit does not do that. It may have been my misinterpretation of the wording on the indoor units being able to “Change Channels” that led to my issue, so I only took one star for not clearly stating the only unit you can see other sensor temps on is the main unit.Temps seem to report accurately, and other than not being able to see other sensor data, the unit works fine.
Wodz –
INCREDIBLE!!!!
This is worth every penny! Absolute game-changer for my house. Different floors of my house are set at different temperatures, and as heat rises, it impacts the humidity on each floor. I already have a fancy Ecobee with remote sensors in many rooms of the house. That means I am already well aware of the temperature in different rooms of the house BUT I had no idea what the humidity was in various rooms. This amazing device and its little satellite units provided me with very accurate humidity readings in four locations of the house. That made me understand exactly where to place humidifiers, what setting they should run on and how long they should run. In the winter your home humidity should be around 40%. Some rooms in my home were at 12%! Now all of the rooms are at 40% thanks to this amazing setup. The remote wall units are 100% accurate as well. For example, I have one of the remote units very close to a remote Ecobee unit and the measured room temperatures are identical. All four locations are accurate and match with the Ecobee. The main Ecobee unit can also read humidity and I have the main AcuRite system placed directly next to the Ecobee and the humidity reading of that room is also identical.When first setting up the units it will take an hour for the readings to level out. If you place one of the sensors too far away from the main hub the “wireless” connection will be lost. Bringing the sensor back near the hub did not resolve the problem. Simply remove the battery from the remote sensor and re-insert it. That brought the unit back online within seconds.In my opinion, this is a must-have product for anyone living in a large home. In a smaller space, like an apartment, the humidity between the rooms will be quite similar. Unless a door has been closed and is trapping heat/cold. I have four levels to my home, so this is something I am kicking myself for not purchasing years ago! On behalf of my respiratory system, thanks for making an incredible product!
Freddy The Frog –
My Top Choice when compared to two other popular units
In this review, I compare the Acu-Rite unit with two other popular 3-sensor units.The Acu-Rite, The VivoSun, The WA54All units have 3-sensorsAll units are battery powered, the Acu Rite requires AA batteries not included.The Acu-Rite was the most accurate with one sensor reading different from the other two. This is the only system that allows for calibration, the WA54 and Vivo-Sun cannot be calibrated.If there is a loss of battery power, the calibration is lost and defaults are set.RANGE: I took all three units more than 300 feet from the sensors and All Three were capable of receiving the signal clearly from that distance.You can see from the photos that there are errors in accuracy with all three units when sitting on the table.. they should all read the same, outside/inside and percentages of humidity, but you can clearly see the variable reporting.All sensors and station were stabilized for over an hour before recording readings so they would be stable.All base stations could be read from low incident angles from the sides, clear and good contrast.All units will last on a single battery load for over 12 months.My clear favorite for the combination of accuracy, display clarity, information reported. was/is the Acu-Rite.I recommend the Acu-rite system over the others by a wide margin.
Arturo Flores –
Muy buena recepción en casa de 2 pisos, preciso y de buena calidad… La calidad se siente muy bien… Muy recomendable
LS –
We have been using it for a month and really like it. It is very functional. We hang on the wall. The font is bold and clear, very easy to see.The only thing to note is the calibration step. Ar first, the 3 sensors are not consistent. This doesn’t mean it is not working, you just need to calibrate them. To do it, you will need to put them at the same spot for like half a day and then calibrate them to show the same temperature and RH. The user manual has the direction for how to calibrate the sensor. After that, you just set the unit and time/date, and then that’s it.We put one the 3 sensors at outside, garage, and basement. We have some food stored in the garage. There is one day that the garage is really hot, like almost 30 degree. We saw the temperature and moved the food to basement, which is the coolest place. We won’t notice the hot temperature so quickly in the garage without this little unit. Also, when kids need to go outside play. you can easily know the temperature outside and let them to wear appropriate clothes. I used to check the weather on my cell, or just have to go outside and feel it. Now it is so easy. Highly recommended!!
Chris Sandford –
We’ve been using it for about a month now, and it does what it’s suppose to. The outside sensor signal has to pass through at least 3 walls over a distance of about 15m and it works fine. From my research it was the best deal for what you get, plus we can easily upgrade and add the wifi module + mobile app option in the future if we want.
Claudio Rios –
muy buen producto, uso residencial
Mark Hobo Allen –
I have used this for approx. a month now. Very accurate and was easy to set-up. I use this for my truck camper with 1 transmitter in the freezer, 1 in the fridge and the 3rd is mounted in my truck box(outside of camper). Main unit is in my bunk area and all this lets me be sure fridge compartments are cold enough(RV’s have crap fridges for the most part)and I can also see how the outside temperature is. Great investment for an RV!