FoamPRO 219 Foam Paint Curler, 9″ x 1/8″

$5.49

Added to wishlistRemoved from wishlist 0
Add to compare
Category: Tag:


Worth: $5.49
(as of Dec 21, 2024 11:36:09 UTC – Particulars)

Product Description

FoamPRO, Faster Start, Finer Finish. Foam Rollers, Painting Tools & Accessories.FoamPRO, Faster Start, Finer Finish. Foam Rollers, Painting Tools & Accessories.

FoamPRO, Faster Start, Finer Finish. Foam Rollers, Painting Tools & Accessories.FoamPRO, Faster Start, Finer Finish. Foam Rollers, Painting Tools & Accessories.

FoamPro Painting ToolsFoamPro Painting Tools

FoamPRO, Faster Start, Finer Finish. Foam Rollers, Painting Tools & Accessories.FoamPRO, Faster Start, Finer Finish. Foam Rollers, Painting Tools & Accessories.

FoamPRO Painting Tools. Solvex Industrial Coating Applicators.FoamPRO Painting Tools. Solvex Industrial Coating Applicators.

Holds extra paint and covers extra space
Bundle Dimensions: 4.064 H x 22.86 L x 9.398 W (centimetres)
Bundle Weight: 0.090 kilograms
Nation of Origin : Mexico

Clients say

Clients discover that the product works nicely with epoxy and solvent-based concrete ground sealers. They’re glad with its dimension. Nevertheless, some prospects have points with the froth thickness and bubble dimension. They point out it is manufactured from skinny foam, is delicate, and has too many bubbles. There are additionally complaints about worth for cash and foam shedding. Opinions differ on sturdiness.

AI-generated from the textual content of buyer evaluations

13 reviews for FoamPRO 219 Foam Paint Curler, 9″ x 1/8″

0.0 out of 5
0
0
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Nancy G.

    Worked Perfectly
    Worked great with solvent based concrete floor sealer

    Helpful(0) Unhelpful(0)You have already voted this
  2. kiteboardobx

    Best for rolling epoxy
    I buy these and cut them in half for a four inch roller. I use these exclusively for rolling epoxy and fiberglass. They don’t want to leave bubbles.

    Helpful(0) Unhelpful(0)You have already voted this
  3. jon horton

    worked well
    worked well used for two park epoxy and lasted thu. the job witch was 2 sheets rough ply no falling apart, wish they made 3/8″ thick. happy.

    Helpful(0) Unhelpful(0)You have already voted this
  4. blehkblargh

    Just as good as West System
    I work on model aircraft, not full scale boats and aircraft. I don’t need a full sized laminating resin roller. These little ones are perfect and work great. They hold just enough resin to help wet out your layup, don’t stick, and don’t leave any bits behind.I had been cutting down West System rollers. I haven’t done the math, but these are very convenient and I would buy them again.

    Helpful(0) Unhelpful(0)You have already voted this
  5. Patricia Farley

    Good finish with epoxy, but comes apart
    Good finish with epoxy, but comes apart during medium/large projects.

    Helpful(0) Unhelpful(0)You have already voted this
  6. H. B. Calder

    Essential for Rolling and Tipping Wet Edge Boat Paint
    This was the secret weapon for tipping and rolling Total Boat Wet Edge paint. The foam is frightfully thin, but that was the secret for getting a thin enough coat that it flowed out nicely. I went through several iterations of nap and foam rollers before I switched these on the final two coats. They were a lifesaver.

    Helpful(0) Unhelpful(0)You have already voted this
  7. On-Line Shopper

    These disintegrated after 3-5 minutes of use
    I tried to use these for epoxy paint on the bottom of my boat. They were horrible, shedding foam and coming apart almost immediately.

    Helpful(0) Unhelpful(0)You have already voted this
  8. Amazon Customer

    Petfect
    These things are way better than the rollers you get at the big box stores.

    Helpful(0) Unhelpful(0)You have already voted this
  9. Melanie Lamoureux

    I bought 2 rollers but only needed 1 of the rollers to paint 19 feet of 62″ canvas front and back with gesso for a total of 4 coats. I was able to wash out this roller over 10 times and it stayed intact. At first I thought it was too thin because I have to reload frequently, but it applied thin flawless coats. 5 stars!!! Very happy with this item!

    Helpful(0) Unhelpful(0)You have already voted this
  10. User 8340

    No lint to pick out of my paint and a nice smooth finish. Very satisfied

    Helpful(0) Unhelpful(0)You have already voted this
  11. Linda

    Plus mince à quoi je m’attendais.Produit sinon ok.

    Helpful(0) Unhelpful(0)You have already voted this
  12. Uschi65

    Great for any type of paint. Very washable.

    Helpful(0) Unhelpful(0)You have already voted this
  13. Trina H

    Loved these rollers

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    FoamPRO 219 Foam Paint Curler, 9″ x 1/8″
    FoamPRO 219 Foam Paint Curler, 9″ x 1/8″

    $5.49

    healthy living fix
    Logo
    Compare items
    • Total (0)
    Compare
    0
    Shopping cart