CURT 52010 Trailer Breakaway Change
Original price was: $12.95.$8.45Current price is: $8.45.
Value: $12.95 - $8.45
(as of Jan 20, 2025 12:57:05 UTC – Particulars)
For any and all forms of trailers with electrical trailer brakes, a CURT breakaway package gives you with the tools you should be ready. We provides three completely different full breakaway methods to accommodate varied trailer sizes and meet your particular towing wants. All of our breakaway kits are examined in your security and meet DOT necessities for holding and breakaway conditions. This breakaway change provides dependable activation of your trailer brakes, that includes silver contact factors for a stable connection and a nylon case to guard in opposition to the weather. It’s designed to be used with the CURT Gentle-Trac 1 and Gentle-Trac 2 breakaway kits and contains a high-temp weldable tab for handy mounting. No one hitches up a trailer anticipating a breakaway, however that does not imply it is best to tow unprepared. Be prepared for something with a CURT breakaway package.
RELIABLE SAFETY. This trailer breakaway change provides safer towing by connecting your automobile to your trailer’s breakaway battery and trailer brakes. If the trailer turns into disconnected whereas towing, the cable is launched and the brakes are engaged
STRONG CONNECTION. To make sure a reliable electrical connection for the wires, this trailer breakaway change is supplied with silver contact factors
EASY TO INSTALL. Mounting this trailer breakaway change in your trailer is straightforward. It comes with a metallic mounting tab with a pre-drilled gap to just accept a screw or bolt
SECURE ATTACHMENT. The included trailer breakaway cable contains a nylon pull pin for simple launch and a looped finish to rapidly and securely connect to your trailer hitch
WEATHER-RESISTANT. To maintain the breakaway change well-protected from the outside components, it comes with a nylon case that won’t rust or corrode
Prospects say
Prospects discover the auto accent simple to put in and a great worth for cash. They are saying it really works effectively, is easy to wire, and is a cost-effective substitute for security tools. The construct high quality is praised as sturdy and well-constructed. Prospects recognize the cable size and match. Nonetheless, some prospects have blended opinions on the breakaway change.
AI-generated from the textual content of buyer evaluations
13 reviews for CURT 52010 Trailer Breakaway Change
Add a review
Related Products
Original price was: $12.95.$8.45Current price is: $8.45.
Randy King –
Works well, great replacement.
The brake switch on my little camper was old and full of crud, so this replaced it. The pull-wire on the old one rusted and this is a shiny new stainless one.
Thom –
Good replacement
I tend to pull our breakaway switch when doing a âtug testâ on our 5th wheel camper as it checks the emergency brakes, locks the brakes to keep the trailer from moving to check the hitch connection, and exercises the switch so it doesât get stuck if it is ever needed. This one matched the original exactly in dimensions and is obviously simple to wire. Good choice for replacement or on a trailer that has had brakes added.
Ellie –
Satisfied Customer
Product as described. Arrived on time and undamaged. Worked great. Recommend seller.
Bud frank –
Solid switch
As advertised, good breakaway switch. All the right parts and installed easily.I just wish I had included a caribinee to connect to the truck
D. Joyce –
Nice, basic brake switch
Nothing special, but has stainless cable. Didn’t include a screw for attachment, but I had the old one.My old brake switch had corroded contacts and was unusable. This is a must-have $10 piece of safety equipment! Replace yours every couple of years.
AussieTX –
Hope I never need it to work!
Very simple switch that is closed when the steel wire pulls out the plastic pin (not shown in the photos). The two wires are shorted which engages my Blue Ox Patriot II brake system. Connected the two wires to a TNP 3.5mm Mono Cable (6FT) that I cut one end off to join to while the 3.5mm plug end connects into the Brake system. Less than $20 spent versus $80+ buying the Blue Ox equivalent. And when its not in use I can swivel it back out of the way as it does stick out some.Here’s hoping the pin is never pulled out, while in transit 🙂
kevin kokoszka –
It works
Installed it then a day or two later I was driving in a tight parking lot and it got the cable got caught on my fifth wheel and it pulled it out. Stopped it very quickly. It works well.
Newkid67 –
Replaced my OEM ESCO part perfectly.
My original Esco part failed after 3 years. (Never used – since this switch is a failsafe device only) The plastic eyelet that attaches the breakaway cable to the switch just fell off. It was attached that night, the next morning the cable is dangling with the remains of the eyelet still attached. This was in my driveway not at a campsite so don’t suspect foul play. The Curt switch is perfect replacement, attached the same, wired the same. Simple install just be sure to disconnect + positive side battery cable before removal of old part/install of new. Your Battery Disconnect switch will not remove power to this Trailer Breakaway switch!! It is wired “HOT” to the positive side of battery… hence remove battery cable First or you may find yourself welding instead.
Roland B. –
Works great easy to hook up
Hunter-Gatherer –
Quality break-away switch and cable
NO NAME –
Did the job, easy to install and fault free
Amazon Customer –
Happy good price
Richard Oulahen –
Cheaper then local trailer shop.