Energy Cage, Multi-Useful Energy Rack with J-Hooks, Dip Handles, Landmine Attachment and Elective Cable Pulley System for Dwelling Health club
Original price was: $389.99.$309.49Current price is: $309.49.
Worth: $389.99 - $309.49
(as of Nov 22, 2024 07:48:23 UTC – Particulars)
From the model
Multifunctional Energy Cage
Construct Your Personal Dwelling Health club!
STRONG AND STURDY：This energy cage with pulley system has been constructed with exact laser reducing and powder coated end, options 1.5mm thick metal, 50mm x 50mm uprights, further reinforcing tab, which make it very sturdy and dependable. 1.14inch holes with 4in gap spacing comes as customary which permits infinite potentialities for attachments.
ENDLESS TRAINING POSSIBILITIES:No house or storage fitness center ought to be with no Energy Rack. You can also make 10-level peak adjustment for the j-hooks and security bar, 3-level peak adjustment for the dip handles, and you may also regulate the dip handles to the underside gap for push up coaching. once you coaching whith the pulley system, you may improve or lower the weights based on your plan. You may practice your full-body with only one system.
VERSATILE AND ACCESSORIES COMPLETE：This UF-896 is probably the most versatile, heavy obligation energy rack system in the marketplace. Attachments included Tricep rope、Ankle strap、T-bar、lat pull-down bar、a pair of cable handles/heavy obligation J-Hooks/Dip bars/Security bars、6-peg weight plate storage、360 diploma landmine、pulley system and band pegs. With 1000 Pound Capability Energy Cage, this energy cage provides you the flexibleness for numerous energy coaching exercise, inside a protected setting and in a compact house.
This energy cage squat rack is designed with a big walk-in house, offering simple side-to-side motion. Cage exterior dimension – 47’’L x 29.5’’ W x 81’’ H. Mix it with different health gear similar to barbell, weight bench, resistence bands, deliver much more train into your each day life, as a result of your coaching no opening hours, no route, no stress practice, higher at house than at fitness center.
[FULL-BODY WORKOUT] – ULTRA FUEGO energy rack cage not solely might be carried out on the mainframe together with squat, bench press, pull up /chin up, dip station, push up and many others. Additionally it is geared up with higher and decrease pulley system for lat pulls down, bicep curl, seated rowing.
2-YEAR WARRANTY:The Energy cage rack with lat pulldown gives 2-Yr Guarantee and prime quality customer support.Every thing we do is to make sure you have a memorable purchasing expertise.
PACKAGE AND SHIPPING:This merchandise has 3 containers in whole,that are shipped individually to cut back the transit injury.If in case you have any points and considerations,please contact us. We’re right here for you everytime you wants.
Clients say
Clients like the durability, ease of meeting, and worth for cash of the sporting items. They point out it holds the weights simply advantageous, is fairly easy to place collectively, and is definitely worth the worth. Some additionally recognize that it appears nice and is a house fitness center. Nonetheless, some clients have completely different opinions on the equipment and dimension.
AI-generated from the textual content of buyer opinions
2 reviews for Energy Cage, Multi-Useful Energy Rack with J-Hooks, Dip Handles, Landmine Attachment and Elective Cable Pulley System for Dwelling Health club
Add a review
Related Products
Original price was: $389.99.$309.49Current price is: $309.49.
Potz –
Amazing price for a beginner to intermediate lifter
This rack has been a game-changer for me, allowing me so much versatility in my home gym.Assembly was easy, and it took 3-4 hours to get the rack, and the lat pulldown dialed with a socket wrench. It’s a two-person job, but in a pinch and with some extra time, you could do it by yourself.Once assembled, it has a compact size perfect for a garage, but it’s still big enough to get the job done. Despite the 2×2-inch construction and the relatively high-gauge steel, the rack manages to be very sturdy. The only time I’ve seen it even slightly wobble was when I roughly dropped a loaded barbell heavily into the j-hooks. Although I have not bolted the rack to the floor (a possibility), even on weighted pullups, the rack doesn’t really shake or shift. The lat pulldown works perfectly and it comes with all sorts of useful attachments.Some people have complained about the J-hooks, but I haven’t really had a problem with them. They look more like miniature spotter arms that allow you to place a bar away from the back uprights and, thus, away from the lat pulldown wires. Without the J-hooks extending out into the rack, the back of the rack and wires would prevent you from setting a bench in a position where you could be almost directly under the bar. Yes, the J-hooks are a little loose on the rack, have a weight limit of 220 lbs, and the rubber pads that protect the hooks are cheaply made, but it is absolutely not a deal breaker.The only problem that I really have with this rack is that it’s so good that I’ve been doing a lot more lifting and have now begun to daydream about upgrading to something wildly more expensive. If I were to improve upon this rack, I would place the holes closer together. At times, I’m setting up the bar, and it’s either a little too near or too far from the floor/bench to be optimal. The landmine attachment is great if you’re lifting it straight up and down, but its attachment point to the rack doesn’t allow it to move quite as nicely laterally. Lastly, my dip bars were very slightly bent (almost imperceptible except to me, but I can’t not see it!).You can’t expect commercial-grade equipment at this price, however, this rack is solid, versatile, and still a steal for the money.
gimpyviper –
Awesome deal for the price
Overall, a great bargain for a sturdy well made product!All three boxes arrive without any real issue, in the middle of a snowstorm too! (Thank you FedEx!) They break the parts down perfectly so no one box is overly heavy. Assembly was relatively straight forward. Watch the assembly video to have an idea of what you’re gonna be doing. We didn’t and it made assembly more awkward than it needed to be for me and my kids when we attached the upright posts. You’re gonna want at minimum a ratchet and socket set but ideally bring an impact driver.Note – They’re not as clear about the actual assembled height. Mostly listed here at 80.7″ but only in one spot does it mention it’s actually 82.7″ tall to the top of the pull up bar, so be sure to factor that in if you have low height clearance like me. The room in my basement where this went, the height varies from 82″ – 84″ depending on high or low spots on the floor coinciding with ceiling joist settlement/bowing, factor in about half an inch for the floor mats and I was really tight on clearance and in the end I had to position the cage so the pull up bar sat in between ceiling joists. Which for me wasn’t an issue because I knew I wouldn’t have the height clearance to do pull/chin ups regardless but something to keep in mind if you have height clearance issues like me.If you’re getting the lat pull down attachment be aware that while it only adds about an additional 10 inches to the depth of the cage you need to give it much more clearance than that in order to fit a full 45 lbs plate on the lat pull down plate carrier.The assembly instructions were decent, take your time on the pulley and cable assembly as the instructions are accurate but not obvious. I’ve always been that guy that can just look at assembly instructions briefly and know what to do but I had to slow down for the pulley and cable section. You def need to take a little more time on those couple of pages. It’s not hard, not really complicated either but you just need to take a moment to make sure you understand the path of the cable the pulley layout. Once you digest that, it’s straightforward.Once assembled, it’s pretty sturdy. It’s more than enough for my needs, I paired it with a 300 lbs Olympic weight set from Dick’s which this cage can handle without breaking a sweat. If you’re a big power lifter though your mileage may vary. The lat pull down attachment works really well, I was worried about the action not being smooth or awkward or jank or all of the above but it’s not. We’ll see how it holds up over time. Hopefully Ultra Fuego sells replacement cables/pulleys as the engineer in me always sees moving parts as potential future failure points.Overall, me and my kids couldn’t be happier with this. Will update if anything changes but for now, totally worth it and would recommend and would buy again if needed to!