mibest OLED Finger Pulse Oximeter, O2 Meter, Dual Color White/Silver

Perfect for my family’s needs
I purchased this pulse oximeter for our family’s use. Four of the three of us have asthma, seasonal allergies, and I recently had pneumonia, so I’ve been wanting to purchase one for quite a while. I thought they would cost too much or they wouldn’t work, but I was pleasantly surprised at the price and how well it’s working! The reading is the same as the professional Pulse O2 meters at hospitals and doctor offices.
I love that it came with a little pouch and a lanyard! I keep it hung up where I know I can find it when we need it and the pouch keeps it clean. The auto off feature and the fact that it turns depending on how I’m using it (wearing it or reading it on one of the kids) are very helpful features!
With the extent of the breathing troubles we have in our home, I feel much more comfortable knowing I have a quick way to check that my family is safe and healthy.

Assuming accurate— it works!
mibest Silver Dual Color OLED Finger Pulse Oximeter & Blood Oxygen Saturation Monitor was easy to set up.
Not much to do: place batteries in the compartment using the diagram that’s visible when you remove the battery compartment cover. You do need to press down lightly and push a little in the direction indicated. If I remember correctly, I read a review where someone had a problem getting the battery compartment cover off. It’s really not difficult, unless you’re trying to push in the wrong direction or not pressing down at all. I found using the heel of my hand the easiest method. To attach the lanyard, simply thread the thin, small loop into the hole intended for that purpose. It’s identified in the full directions, if you need help locating it. Once you have the small loop completely through, thread the long cord through the loop and pull, tightening in place. Viola! Lanyard is attached.
Depress power button, place your finger inside and wait. It took a few seconds. Actually the first time it took longer than I thought it would. I was just about to switch to another finger when it changed from the bars to the reading.
Assuming it’s accurate, it works. I had no idea what my oxygen level was but I had a pretty good idea on my pulse rate. It was right in the range I expected that to be. I gave it 4 stars because I can’t verify the accuracy. If I remember to take it with me the next time I go to the MD, I’ll compare it with theirs. I’ll re-evaluate editing this review going to 5 stars if we agree and lowering the stars if there’s a meaningful discrepancy. Until then, this is a firm 4 stars maybe even 5.
Note: The only other thing I have to say is the directions say to remove the film from the display before using….
just one problem, there was no film. The unit was sealed in a plastic bag so maybe they’re no longer using the film.
It was packaged well & arrived when expected. This is not a heavier, heavy duty one you may be familiar with if you’ve ever been hospitalized, but then it doesn’t need to be. Although light weight, I think if treated properly and
not misused, it should last for years with only a change of batteries now & then.

Easy to see and read
Our original on had lost it’s visual display was dim and unable to read. This one has made it easy to see so far.

Fast and Accurate
I bought 8 different models trying to find the most accurate oxygen sensors. To save you the time and money I recommend Innova and this Mibest is good as well.